License #1107541
-
Call us Today
+1-925-433-6400
Menu
License #1107541
A well-functioning furnace is essential for staying warm and comfortable during the cold winter months. However, over time, even the most reliable furnaces can experience issues that require immediate attention. Ignoring these warning signs can lead to more significant problems, higher energy costs, and potential safety hazards.
In this blog post, you’ll explore 14 common warning signs that indicate the signal of furnace repair and assist you in taking timely action to prevent the chances of sudden breakdown.
To tackle the unexpected issue, it’s essential to look after the furnace thoroughly and detect the problem before it becomes unstoppable. Here is the list of common issues that might require your immediate attention:
Normally, furnaces operate quietly and hardly produce noise while running. If you start experiencing unusual noises, like banging, screeching, whistling, or changing, it indicates the signal of a serious problem. It commonly happens due to loose components, excessive debris buildup, or worn-out parts. So, it is necessary to take action timely and repair worn-out components before the issue worsens.
If you notice that certain rooms in your home are significantly warmer or colder than others, it could be a sign of a problem with your furnace. Uneven heating is caused by many factors, including clogged ducts, faulty heat exchangers, or malfunctioning thermostats. To prevent such problems, contact HVAC technicians and repair them with experts.
If your energy bills are suddenly higher than usual, it could be a sign that your furnace is working harder to heat your home. If the filter is blown due to dirt, duct leakage, or malfunctioning thermostats, the furnace starts to consume more power to deliver constant heating. So, it is essential to sort out the problem of unbearable utility bills.
If your furnace is not producing enough heat or is not producing any heat at all, it is a clear sign that it needs immediate attention. It commonly happens due to faulty thermostats, clogged air filters, or problems with the ignite system. It is crucial to call the professionals and let them handle technical problems. Avoid using a DIY approach to fix.
A furnace that cycles on and off frequently is not only inefficient, but it can also put additional strain on the system. Frequent cycling can be caused by a variety of factors, including a dirty air filter, a malfunctioning thermostat or a problem with the blower motor. To prevent such a cause, call a professional and repair the furnace professionally.
If you notice any strange odors coming from your furnace, such as a burning smell or a musty odor, it could be a sign of a serious problem. It occurs due to gas leaks, faulty components, or excessive buildup. Call HVAC technicians and protect your loved one from the effects of carbon monoxide.
A healthy furnace flame should be blue and steady. If the flame turns yellow, orange, or flickering, it reveals a problem with the burner or gas supply. Address the problem before it becomes unavoidable and call a professional to fix this issue.
A blue pilot light is a sign of a healthy furnace. If your pilot light turns yellow, orange, or blue pilot light corrosion may be a sign of a gas leak or a problem with the gas supply. Do not wait for help; call the HVAC technician right away. Ignorance or delay may cause severe health hazards.
Carbon monoxide is a deadly gas that can be produced by a malfunctioning furnace. Carbon monoxide levels create the problem of dizziness, headache, nausea, or confusion. Waiting or delaying can cost your life. Never ignore the symptoms of carbon monoxide and leave the house immediately until help emerges.
Blocked ducts can restrict airflow and reduce the efficiency of your furnace. If you notice that your furnace is working harder than usual, it could be a sign of blocked ducts. Check thoroughly and clean the blocked filter by yourself or call a professional.
Leaky ducts can cause a significant loss of heated air, leading to higher energy bills and lower indoor comfort levels. If you suspect that your ducts are leaking, it’s important to detect the faulty parts and seal them with silicon or mastic tape.
Rust and corrosion can weaken the structural integrity of your furnace and lead to a variety of problems. If the furnace components are affected by rust or corrosion, repair your furnace right away to prevent the cost of a complete replacement.
The evaporator coil is a critical component of your furnace that helps to remove moisture from the air. Evaporator coil issues caused by dirt or damage lead to a variety of problems, including poor indoor air quality and reduced heating efficiency.
The heat exchanger is a vital component of your furnace that transfers heat from the combustion chamber to the air that circulates through your home. To prevent the risk of burnt or musty, seal the crack timely.
By recognizing and addressing furnace repair signs, you not only prevent costly breakdowns but also maintain consistent indoor temperatures during winter. Once you notice any sign mentioned above, contact a qualified HVAC technician to diagnose and repair. To get a thorough inspection to prevent furnace repair costs, Contact us.
Depending on usage and brand, you must change the furnace filter after 1 to 3 months.
Typically, the average lifespan of a furnace is 15-20 years, but proper maintenance can prolong it.
Before the peak season starts, call the technicians to service the furnace.
Heat pumps can perform both heat and cooling, while furnaces are only used for heating.
Due to clogged filters, blocked ducts, or malfunctioning thermostats, your furnace is not heating the house properly.
